WEN 6 X 48-Inch Belt And 9-inch Disc Sander With Stand

Remember when your sander was a stander? Smooth out intricate contours or remove material quickly with the WEN 6 x 48-Inch Belt and 9-inch Disc Sander with Stand. The heavy-duty body provides enough weight to prevent walking and vibration during use while the steel stand keeps sanding surfaces elevated over three feet off the ground. Our powerful 9A motor prevents the unit from bogging down under even the largest of loads, providing a belt speed of 2700 feet per minute and a disc speed of 3450 rotations per minute. The tension quick release lever gives you the power to switch and replace sandpaper grits as needed without wasting any time, making belt changes easier than ever. The spacious 11-3/4 x 6 inch disc table bevels up to 45 degrees while the belt tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular project. The adjustable 9-3/4 x 5-3/4 inch sanding support doubles as both a work table and a work stop depending on the orientation of the belt. This package also includes an 80-grit sanding disc, an 80-grit sanding belt, a miter gauge for angled sanding, and two dust ports for minimal cleanup. And, because its a WEN product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. The WEN 6 x 48-Inch Belt Sander with 9-Inch Disc and Stand provides users the versatility of smaller sanders with the capacity of larger industrial models.

• 9 Amp motor provides up to 3450 RPM
• Two-in-one sanding machine includes both a 6-by-48 inch belt and a 9-by-9 inch disc
• Heavy-duty body prevents any heavy vibrations
• Tension release lever makes for simple changes to sandpaper belt grits
• Includes an 80-grit sanding disc, an 80-grit sanding belt, a miter gauge, two dust ports and an open frame stand
• Backed by a two-year warranty

Specifications

• Maximum Speed (rpm): 3450
• Dust collection type: Port
• Maximum belt sanding speed (ft./min.): 2700
• Tools Product Type: Power Tool
• Amperage (amps): 9 A
• Variable Speed: No
• Color Family: Black
• Condition: New
• Power Tool Features: No Tool Belt Change,Stand Included
• Bench & Stationary Tool Type: Sander
• Portability: Stationary
• Cord Length (ft.): 6
• Voltage (volts): 120
• Product Weight (lb.): 83.79
• Minimum belt sanding speed (ft./min.): 2700
• Reconditioned: No
• Belt length (in.): 48
• Belt width (in.): 6
• Product Height (in.): 55.31
• Product Depth (in.): 28.74
• Disc table width (in.): 6
• Product Width (in.): 25.59
• Disc table length (in.): 11.75

 WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov